Used Meyer replacement angling block loaded.
Here is good used 15758 Meyer angling block. There has been more than one style so make sure this is the one you need. This can be used to make a Meyer E46 into an E47. Or can be used to replace the block on an E47, E57, E60. Some of the newer pumps have the coupler coming out of the side of the block this one has both of them coming out of the top. This is also the style with the acorn nut on the side for the crossover valve both have been pulled out and checked. This has all new aftermarket valves and coils. New B valve 15698, new C valve 15381, new coils 15382 & 15430.
We have many and they all look similar but you will not get the one in the picture. It will be a good used comparable block.
We also sell the bare block if you don't need the valves.
We also have new blocks available full and empty. Make sure you also pick up a basic seal kit, the Genuine Meyer fluid you need, and the Meyer yellow paint to do a proper rebuild. If you are doing this yourself, below we have links to the service manuals to walk you through the rebuild:
E-47, E-46 Complete Service Rebuild Manual
